1.Description:
DC Motor Speed Controller which is also Pulse Width Modulator. Abbreviation PWM.DC motor governor is a device for adjusting the speed of a DC motor.
It has been widely used in DC motor speed regulation, industrial conveyor belt speed regulation, lighting and lighting mediation, computer power supply cooling, DC fan and so on.
2.Features:
1>.High power;
2>.Small size;
3>.Low power consumption;
4>.Simple operation;
5>.Dual Driver;
6>.Support independent control for 2 motors;
7>.Support 433MHz remote control(Not included).
3.Parameters:
1>.Product Name: 5A Dual Motor Drive Module
2>.Product Number: ZK-5AD
3>.Working Voltage: DC 3.0V-14V
4>.Input Signal Voltage:DC 2.2V-6.0V
5>.Drive Current: 5A
6>.Stand-by Current:10uA
7>.Working Temperature range: -20℃~85℃
8>.Working Humidity range: 0%-95%RH
9>.Size:38*27*18mm
10>.Mounting hole diameter:2mm
4.Conventional control method
1>.Module can control 2 DC motors separately.
2>.D0 and D1 control Motor 1;
3>.D2 and D3 control Motor 2;
4>.High level signal is DC 2.2V-6.0V;
5>.Low level signal is DC 0.0V-0.7V;
6>.D0~D3 can receive control signal from MCU and other signal source;
7>.Control logic by Drive Logic Table shown as following in the description picture.
5.Remote control mode(The Remote control is not included):
1>.It can be controled by 433MHz Wireless Remote Control Switch Module. User can connect output from 433MHz receiver to input interface at motor drive module. But please noted that the 433MHz Wireless Remote Control Switch Module is not included in this package! User need to prepare in advance or purchase separately.
2>.Its communication distance will just be about 20~30 meter if control motor.Due to interference from motor.
3>.Inching Mode:Motor rotation when press button and stop rotation when release button.Two motor’s work status are independent of each other.
4>.Self-locking Mode:Motor rotation when press button and stop rotation when press button again.Two motor’s work status are independent of each other.
5>.Interlocking Mode:Motor 1 will stop when Motor 2 is working;Motor 2 will stop when Motor 1 is working;Two motor’s work status are not independent.
6>.When changing the direction of rotation of the motor, please be sure to wait for the motor to completely stop,otherwise the module will be damaged due to excessive current.
7>.More information please refer to data sheet about 433MHz Wireless Remote Control Switch Module.
6.Note:
1>.When changing the direction of rotation of the motor, please be sure to wait for the motor to completely stop,otherwise the module will be damaged due to excessive current;
2>.Please don’t short circuit;
3>.Reverse connection protection is not supported;
4>.433MHz Wireless Remote Control Switch Module is not included in this package! User need to prepare it in advance or purchase separately.
7.Application:
1>.Wireless remote control car;
2>.Ship model;
3>.Model airplane;
4>.Wireless temperature and humidity detection;
5>.Intelligent data collection;
6>.Motor drive.
8.Package:
1>.1pc of ZK-5AD 5A Dual Motor Drive Module
ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:
1) Paypal Payment
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account).
We are PayPal Verified 
2) Bank Transfer / Wire Transfer / T/T
Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.
For other payment method, please contact us at orders@icstation-team.com for more details.
.jpg){kind=spacer}
