Dot Matrix Module 8x32 MCU Control Drive Module Red LED Display Board Module with 5P Dupont Wire

Description:

It is an integrated serial input/output common cathode display driver. It connects the microprocessor with the 8 digit number of 7 digital LED displays, and can also connect to the bar graph display or 64 independent LED.

It includes a B type BCD encoder on a chip, a multiple scan circuit, a segment drive, and a 8*8 static RAM used to store each data. Only one external register is used to set the segment current of each LED.

A convenient four line serial interface can connect all the general-purpose microprocessors. Each data can be addressed without rewriting all the displays during the update. Also allows users to select or not code for each data.

The whole device contains a 150 A low power shutdown mode, analog and digital brightness control, a scan limit register allows users to display 1-8 bit data, and a detection mode that allows all LED to be luminous. Only 3 IO ports will be required to drive the 1 dot matrix. There is no flicker when the dot matrix is displayed. Support cascading.

Parameters:

1>. A single module can drive a 8*8 common dot matrix.
2>. Working voltage: 5V.
3>. Size: 12.8 cm X width 3.2 cm X height 1.3 cm.
4>. With 64 fixed screw holes, aperture 3mm.
5>. Module with input and output interface to support multiple modules cascading.

Wiring instructions:

1>. The left side of the module is the input port and the right is the output port.
2>. When controlling a single module, you only need to connect the input port to the CPU.
3>. When multiple modules are cascaded, the input ends of the first modules are connected to CPU, and the output ends are connected to the input ends of second modules. The output ends of the second modules are connected to the input ends of third modules, and so on.
Take 51 MCU as an example:
VCC - 5V
GND - GND
DIN - P2.2
CS - P2.1
CLK - P2.0

Package included:

Dot matrix module four in one (finished product, with dot matrix, well tested).
20CM DuPont line 5Pcs.

I. Tested by ICStation's Outstanding Partner Csongor Varga:

Learn More Details in the Video:
(The language in the video is English)

II. Tested by ICStation's Outstanding Partner Scott:

Dot Matrix Module and Witty ESP8266

Learn More Details in the Video:
(The language in the video is English )

ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 

We are PayPal Verified 

2)  Bank Transfer / Wire Transfer / T/T

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.

For other payment method, please contact us at orders@icstation-team.com for more details.