Bluetooth-Compatiable Amplifier Board, 15Wx2 Dual Channel Stereo Audio Amp, APP Infrared Remote Control for DIY Wireless Speakers

1.Description:
XY-X15H is a 15W+15W Dual Channel Stereo Bluetooth 5.1 Audio Amplifier Module which also can be controlled by APP Sinilink and infrared remote controller.
It can modify the Bluetooth name and password, also can turn ON/OFF Bluetooth prompt tone. 2.0 channels audio signal output.
Built-in amplifier module therefore it can connect to loudspeaker directly. It is ideal for DIY wireless Bluetooth speakers and transponders.

2.Features:

[Remote Control + App Control]: In addition to manual operation, users can control it remotely via the Sinilink APP or infrared remote controller. The infrared remote control can adjust the volume, switch music, switch sound effects, and also mute and turn off the power which can implement remote control and more convenient operation. The APP can support the modification of the Bluetooth name and set the Bluetooth pairing password which greatly improving the safety of the use of the product. At the same time, the Bluetooth prompt tone can also be turned ON or OFF as your needs.

[Multiple Audio Input Ways-Bluetooth/AUX/U-disk] : Supports multiple audio input modes. Supports BT 5.1 technology, which can be easily connected to mobilephones, tablets, and other devices for wireless playback. 3.5mm AUX input jack, which can be connected to the TV, computer, and other devices. Support USB input and U-disk decoding function, it can plays your favorite music directly via USB cable and U-disk when there is no other device. Also supports WAV, FLAC, APE, MP3, and other formats, and is compatible with USB flash drives up to 32G/FAT32 format.

[15W+15W Dual Channel Stereo]: It has a built-in amplifier chip to provide 15W*2 drive capability with DC 9V-24V work voltage. Recommended to use more than 3A current to get more clear, bright and high fidelity sound.

[Easy and fast operation]: It only needs to connect the matching power supply and speaker to start working. The on-board 360° infinite tuning potentiometer can not only adjust the volume, but also playing and pause easy and fast operation.

[Multiple Protections]: It has multiple protection mechanisms to ensure its safe operation with over-voltage protection, under-voltage protection, over-current protection, short-circuit protection, overheating protection, clipping protection.

3.Functions:
1>.Bluetooth APP Control
2>.Infrared Remote Control
3>.Independent Power Switch
4>.Bluetooth/AUX/U-disk Audio Input
5>.15W+15W Dual Channel Stereo
6>.ON/OFF Prompt Voice
7>.Modify Bluetooth Name
8>.ON/OFF Bluetooth Password
9>.Modify Bluetooth Password
10>.Adjust Volume for Prompt Voice
11>.360° Infinite Adjust Volume
12>.RCA Audio Interface

4.Parameters:
1>.Work Voltage:DC 9V-24V (12V or more recommended)
2>.Work Current:>3A
3>.Unique function:Sinilink APP control
4>.Channel:2.0 channel stereo output
5>.Bluetooth version: 5.1
6>.Audio input type:Bluetooth/AUX/USB; USB flash drive: WAV, FLAC, APE, MP3 (Max 32G/FAT32 Format)
7>.Audio output type:Left/Right
8>.Adjust volume:360° Potentiometer adjustment
9>.Output power:10W*2 at 8ohm 12V ; 20W*2 at 4ohm 12V ;15W*2 at 8ohm 16V;20W*2 at 8ohm 24V
10>.Communication distance:15meter (Max)
11>.Module Size:78*52*35mm

5.Use steps:
1>.Choose the right speakers and connect as shown in wiring diagram.
2>.Connect to right power supply from DC-005 power socket.LED indicator will flashing and it means that module enters pairing mode.And then speak prompt voice and it means that module is waiting for pairing.
3>.Turn ON power supply switch.
4>.Turn ON Bluetooth on phone.
5>.Select Bluetooth device ‘XinYi’ or modified name in your Bluetooth device listing.
6>.LED indicator will keep ON and it means that module is successfully connected and is waiting for playing.
7>.XY-X15H will playing music after select music on phone.LED indicator will keep slowly blinking.
8>.Adjust potentiometer to change volume as you need.
9>.Open APP Sinilink and register an account if need control by APP. Note: You can choose to log in as a tourist without registering.
10>.Click the dot in the left to add device.
11>.Select ‘Bluetooth devices’ and then Search Bluetooth.
12>.Select devices ‘Sinilink-APP’ or ‘XinYi’ or ‘XYV122V....’ to connect module.
13>.User can adjust volume, select next or previous, play/pause, select EQ, reset name, enable/disable/set password, enable/disable Bluetooth prompt tone.
14>.XY-X15H will speak prompt voice if disconnected.

6.Application:
1>.Modified/repair/replace speaker
2>.Amplifier equipment for training/activity site and so on
3>.Car Bluetooth device
4>.Music Festival Party
5>.Family entertainment and leisure
6>.Games and Cinema

7.Note:
1>.The power amplifier board should be as far away as possible from the WIFI signal (router) avoid signal interference.
2>.It is power supply voltage DC 9V-24V with more than 3A current.
3>.It is recommended to use a working power supply of more than 12V.
4>.Please don’t use too long wires to avoid signal interference.
5>.There can be enough power output only when the audio input is sufficient and the power supply voltage/current input is sufficient.
6>.The higher the power supply voltage, the greater the output power.
7>.The smaller the impedance of the speaker, the greater the output power. It is recommended to use 4ohm speaker.

8.Package:
  1pcs 15W+15W Stereo Bluetooth 5.1 Amplifier Module (Red)
  1pcs Infrared Remote Controller
  1pcs RCA to AUX Audio Wire
  1pcs 3.5mm AUX Audio Wire

9. User Manual (PDF):

ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 

We are PayPal Verified 

2)  Bank Transfer / Wire Transfer / T/T

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.

For other payment method, please contact us at orders@icstation-team.com for more details.