DC-DC Boost Power Supply Module DC 3V-35V to DC 3.5V-50V 6A 100W High Power Digital Display

1>.Description:
 It is a boost module.This board is a booster board, and the output voltage is greater than the input voltage.When the output voltage is less than 4V,the onboard voltmeter will not work.

2>.Feature:
 1.It has a digital display to display voltage.
 2.Its conversion efficiency is high.
 3.It has an output voltage potentiometer to adjust the voltage in time.
 4.It has a display switch button to switch between input voltage display and output voltage display.

3>.Parameter:
 1.Product Name:Boost Module
 2.Input Voltage:DC 3.3~35V
 3.Input Current:9A(Max)
 4.Output Voltage:DC 3.5~50V
 5.Output Current:6A(Max)
 6.Output Power:100W (input voltage greater than 12V can reach the maximum output of 100W)
 7.Conversion Efficiency:96%(Max)
 8.Output Ripple:40mV(TYP)
 9.Range of Onboard Voltmeter:3~55V
 10.Work Temperature:-25℃~85℃
 11.Work Humidity:5%~95%RH
 12.Size:68*42*18mm

4>.Instructions for Use:
 1.The voltmeter can be turned off.Press and hold the switch for 4 seconds,and then it can be turned off by letting go.

 2.Input and output voltage measurement error calibration function,long press the switch for more than 4 seconds,after letting go,it will enter the voltage measurement error calibration function.

 3.The digital tube flashes to display the voltage calibration ratio value (range -5V~5V).At this time,short press the button to change this value (cycle between -5V~5V).

 4.When the voltage value displayed by the voltmeter is too high,lower the reference value (adjust to a negative number).

 5.When the voltage value displayed by the voltmeter is low,increase the reference value (adjust to a positive number).

 6.After adjusting to the reference value you want,press and hold the button for more than 2 seconds.After letting go,save the set value and return to the normal display voltage.The set correction value will take effect immediately and will not be lost after power failure.

5>.Package:
 1pcs Boost Module

ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 

We are PayPal Verified 

2)  Bank Transfer / Wire Transfer / T/T

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.

For other payment method, please contact us at orders@icstation-team.com for more details.