12V 1 Channel Relay Module/Switch Optocoupler Fully Isolated Microcontroller PLC Amplification

1.Description:
  It is a 12V 1 Channel Relay Module/Switch Optocoupler Fully Isolated Microcontroller PLC Amplification.

2.Parameter:
  1>.Power supply: 12V
  2>.Static current: 0mA
  3>.Single channel operating current: 50mA
  4>.Trigger mode: High-level trigger / Low-level trigger
  5>.Load voltage: DC 30V / AC 240V
  6>.Response time: Greater than 30ms
  7>.Load current: Maximum 10A
  8>.Relay lifespan: Over 100,000 cycles
  9>.Size: 64*50mm

3.Port Description:
  1>.The module requires a DC power supply that matches the voltage of the relay.
  2>.The VCC (positive) and GND (negative) ports are the power supply ports for the module, providing power for the relay coil and signal amplification circuit.
  3>.SIG+ (signal positive) and SIG- (signal negative) are the signal trigger ports. When using high-level trigger (PNP), the signal is connected to the SIG+ port and the high-level jumper on the circuit board is shorted. When using low-level trigger (NPN), the signal is connected to the SIG- port and the low-level jumper on the circuit board is shorted.
  4>.The module supports signal isolation triggering. In this mode, for high-level trigger (PNP), the signal is connected to the SIG+ port and the signal negative port is connected to the negative terminal of the signal power supply. For low-level trigger (NPN), the signal is connected to the SIG- port and the signal positive port is connected to the positive terminal of the signal power supply.

4.Package:
   1pcs 12V 1 Channel Relay Module

ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 

We are PayPal Verified 

2)  Bank Transfer / Wire Transfer / T/T

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.

For other payment method, please contact us at orders@icstation-team.com for more details.