Frequency to Voltage Converter Module 0-1KHz to 0-10V Digital to Analog Voltage Signal Conversion Module

Description:
LC_F2V is a module which can transform the frequency pulse signal into analog voltage signal. It can transform 0-1KHz frequency signal into 0-10V voltage output.
Adjusting frequency can change output voltage, and it can be applied to interface conversion between PLC and frequency converter or sports control card and frequency converter interface matching control.

Features:
1>.Operating Voltage: 13.5-30V
2>.Input Frequency Range: 0-1KHz
3>.Output voltage fine tuning
4>.Adjusting potentiometer can calibrate the relationships between frequency and voltage
5>.Signal input port adopts optocoupler isolation, it guarantees good anti-interference capacity
6>.F/V converter module, response time is 0.3-0.5s. If you want to adjust frequency by a large margin, it needs some time to response
7>.Working temperature:-25~85℃

Interface definition:
1>.VCC: operating power supply
2>.GND: power ground
3>.F: input frequency pulse signal
4>.GND: input ground
5>.VOUT: output corresponding voltage
6>.GND: output ground

Note:
1>.Input different frequency, output will correspond to certain voltage
2>.Input pulse level can be 5V, 12V, 24V, you don’t have to serial connect resistor. But if you input signal frequency, the time should be more than 0.5s
3>.If you want to use it with PLC, it supports NPN. Please make sure that there is GND wire
4>.If you want to use it with encoder, it requires the encoder constant speed rotating for more than 0.5s

Operating Introduction:
1>.Connect the operating voltage with VCC and GND, and they cannot be reversely connected
2>.Connect frequency pulse signal with F, then there will be corresponding voltage output in the  VOUT port
Input and output corresponding relationship: 100Hz=1V; 1KHz=10V
3>.The module precision is 1%, and it cannot be applied to fields which has high demanding of precision

Board Size:

Tested by ICStation's Outstanding Partner Ultr@ FX:

Learn More Details in the Video:

ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 

We are PayPal Verified 

2)  Bank Transfer / Wire Transfer / T/T

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.

For other payment method, please contact us at orders@icstation-team.com for more details.