HIFI Bluetooth Amplifier Board 100W+100W Audio Amp Stereo APP/Infrared Remote Control for DIY Wireless Speakers

1.Description:
XY-Y100H is a high-power 100W+100W HIFI Stereo Bluetooth 5.1 Audio Amplifier Module which also can be controlled by APP Sinilink and remote controller. It can modify the Bluetooth name and password, also can turn ON/OFF Bluetooth prompt tone. 2.0 channels audio signal output. Built-in amplifier module therefore it can connect to loudspeaker directly. It is ideal for DIY wireless Bluetooth speakers and transponders.

2.Features:
1>.Bluetooth APP Control : It can not only be used as an ordinary Bluetooth receiver, but also use the special Bluetooth APP SiniLink to achieve the play state switching and sound quality playback. In particular, it can support the modification of the Bluetooth name and set the Bluetooth pairing password which greatly improving the safety of the use of the product. At the same time, the Bluetooth prompt tone can also be turned ON or OFF as your needs.

2>.Remote Control : It uses an infrared remote control with silicon rubber buttons which can improve user experience. It can adjust the volume, switch music, switch sound effects, and also mute and turn off the power which can implement remote control and more convenient operation.

3>.Bluetooth/AUX/U-disk : It can not only receive music via Bluetooth, but also via AUX and U-disk to fit different needs. It is capable of playing WAV,FLAC,APE,MP3 music files. Independent power switch to control its working status at any time.

4>.100W+100W Dual Channel Stereo: It has a built-in TPA3116D2 amplifier chip to provide 100W*2 high power drive capability with DC 9V-24V work voltage.Recommended to use more than 5A current to get more clear, bright and high fidelity sound.

5>.Easy and fast operation: It only needs to connect the matching power supply and speaker to start working. The on-board 360° infinite tuning potentiometer can not only adjust the volume, but also playing and pause easy and fast operation. At the same time, an IPEX external antenna socket is reserved for effective receiving Bluetooth signals when the XY-Y100H is installed in a metal box.

6>.Protection Function : It has multiple protection mechanisms to ensure its safe operation with Over-voltage protection, under-voltage protection, short-circuit protection, overheating protection, clipping protection.

3.Functions:
1>.Bluetooth APP Control
2>.Remote Control
3>.Independent Power Switch
4>.Bluetooth/AUX/U-disk Audio Input
5>.HIFI 100W+100W Dual Channel Stereo
6>.ON/OFF Prompt Voice
7>.Modify Bluetooth Name
8>.ON/OFF Bluetooth Password
9>.Modify Bluetooth Password
10>.Adjust Volume for Prompt Voice
11>.360° Infinite Adjust Volume

4.Parameters:
1>.Work Voltage:DC 9V-24V(12V or more recommended)
2>.Work Current:>5A
3>.Unique function:Sinilink APP control
4>.Controller IC: TPA3116D2
5>.Channel:2.0 channel stereo output
6>.Bluetooth:BLE 5.1
7>.Audio input type:Bluetooth/AUX/USB
8>.Audio output type:Left/Right
9>.Adjust volume:360° Potentiometer adjustment
10>.Frequency range:20Hz-20KHz
11>.Output power:
11.1>.Output power 10W*2 at 12V 8ohm
11.2>.Output power 30W*2 at 24V 8ohm
11.3>.Output power 20W*2 at 12V 4ohm
11.4>.Output power 50W*2 at 21V 4ohm
11.5>.Output power 70W*2 at 24V 4ohm
11.6>.Output power 100W*2 at 21V 2ohm
12>.Communication distance:15meter(Max)
13>.Over temperature protection:Yes
14>.Short circuit protection:Yes
15>.Over voltage protection:Yes
16>.Under voltage protection:Yes
17>.Clipping protection:Yes
18>.Work Temperature:-20℃~85℃
19>.Work Humidity:5%~95%RH
20>.Module Size(Installed):95*59*22mm

5.Use steps:
1>.Choose the right speakers and connect as shown in wiring diagram.
2>.Connect to right power supply from DC-005 power socket.LED indicator will flashing and it means that module enters pairing mode.And then speak prompt voice and it means that module is waiting for pairing.
3>.Turn ON power supply switch.
4>.Turn ON Bluetooth on phone.
5>.Select Bluetooth device ‘XinYi’ or modified name in your Bluetooth device listing.
6>.LED indicator will keep ON and it means that module is successfully connected and is waiting for playing.
7>.XY-Y100H will playing music after select music on phone.LED indicator will keep slowly blinking.
8>.Adjust potentiometer to change volume as you need.
9>.Open APP Sinilink and register an account if need control by APP. Note: You can choose to log in as a tourist without registering.
10>.Click the dot in the left to add device.
11>.Select ‘Bluetooth devices’ and then Search Bluetooth.
12>.Select devices ‘Sinilink-APP’ or ‘XinYi’ or ‘XYV122V....’ to connect module.
13>.User can adjust volume, select next or previous, play/pause, select EQ, reset name, enable/disable/set password, enable/disable Bluetooth prompt tone.
14>.XY-Y100H will speak prompt voice if disconnected.

 

ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 

We are PayPal Verified 

2)  Bank Transfer / Wire Transfer / T/T

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.

For other payment method, please contact us at orders@icstation-team.com for more details.