1.Introduction:
It is a 5V programmable 64-bit RGB light board WS2812B full-color 8*8 color dot matrix screen LED module development board.

2.Feature:
1>. Fixation: Multiple M2 thread holes are preset.
2>. Control mode: The lamp board needs to be equipped with a full-color.
3>. 2054 pitch 3P line sequences are used for most Arduino expansion boards.
4>. Each RGB lamp can be independently controlled to display its effects.

3.Parameter:
1>.Product Model: 64-bit RGB light board
2>.Operating voltage: DC 5V
3>.Lamp bead power consumption: about 0.3W
4>.Number of lamp beads: 64 RGB lights per board
5>.RGB color: full-color RGB
6>.Luminous angle of light: 180°
7>.Work Temperature:-25℃~85℃
8>.Work Humidity:0%~95%RH
9>.Size: 66*66MM

4.Set Method:
1>.Support multi-cascade control: When multi-cascade control, consider the size of the drive current: When more than two cascades, the power supply of the MCU development board cannot meet the work requirements, so it is recommended to use independent on/off power supply.
2>.Control mode: The lamp board needs to be equipped with a full-color controller or microcontroller programming (direct power-on cannot work).

5.Package:
  1pcs 64-bit RGB light board.