- prev
- next
DC 3V-5V 1-Channel Infrared Receiver Board Module Remote Controller Support Self-locking/Inching/Interlocking Mode
$2.79$3.9930%
| Quantity | 3+ | 5+ | 10+ |
| Price | $2.99 | $2.89 | $2.79 |
00d : 00h : 00m : 00s
Item ID: 13653
Product Details
Module introduction:
1>.Operating voltage: 3.5-5V VCC: Connected to the positive pole of the power supply GND: Connected to the negative pole of the power supply
2>.Working current: about 5mA (relay pull-in state)
3>.Static working current: about 3mA (relay release state)
4>.Module type: Infrared 1-way learning type (can learn all NEC format infrared remote control)
5>.Receiving distance: 5-12 meters (straight line distance, the remote control is aligned with the receiving head; there is no obstacle in the middle)
6>.Working mode: self-locking, jogging, interlocking 3 working modes OUT interface---output high and low level
7>.signal: OD interface---output is driving MOS tube switching signal
8>.Work instructions: D1 (learning indicator)
9>.Module size:24*15*12mm
Instructions:
1>.Self-locking mode: After power-on, press and hold the button S1 on the module, the indicator light D4 flashes 1 time, then release the button, then press and hold the remote control button that needs to be learned; the module D4 indicator flashes 3 times and does not flash; this time The remote control button is successfully learned, and the module is automatically set to the self-lock mode.
2>.Jog mode: After power-on, press and hold the button S1 on the module, the indicator light D4 flashes 2 times, then release the button, then press the remote control button that needs to be learned; the module D4 indicator flashes 3 times and does not flash; this time The remote control button is successfully learned, and the module is automatically set to the jog mode.
3>.Interlock mode: After power-on, press and hold the button S1 on the module, the indicator light D4 flashes 3 times, then release the button, then press the remote control button that needs to be learned; the module D4 indicator flashes 3 times and does not flash; The remote control button is successfully learned, and the module is set to be able to turn on or off; after power-on, press and hold the button S1 on the module, the indicator light D4 flashes 4 times, then release the button, and then press and hold the remote control button to be learned; After the D4 indicator flashes 3 times, it does not flash; at this time, the remote control button is successfully learned, and the module is set to be closed only and cannot be turned on; thereby achieving the function of one button to open a button.
4>.Clear operation instructions: After power-on, press and hold the button S1 on the module, the indicator light D4 flashes 5 times, then release the button; the module is cleared.
