Product Details
1.Description:
It is a ENC28J60 network module.
ENC28J60 is an independent Ethernet controller with industry standard serial peripheral interface.
It can be used as an Ethernet interface for any controller equipped with SPI.
2.Feature:
1).ENC28J60 complies with all the specifications of IEEE 802.3 and uses a series of packet filtering mechanisms to restrict incoming data packets.
2).It also provides an internal DMA module to achieve fast data throughput and hardware-supported IP checksum calculation.
3).The communication with the main controller is realized through two interrupt pins and SPI,and the data transfer rate is as high as 10 Mb/s.
4).Two dedicated pins are used to connect LEDs for network activity status indication.
5).Support 25 MHz clock.
6).Clock output pin with programmable prescaler
3.Parameter:
1).Product Name:ENC28J60 Network Module
2).Input Voltage:DC 3.14V-3.45V
3).Chip:ENC28J60/SS chip
4).Crystal Oscillator:25MHz
5).Network Interface:HR911105A
6).Work Temperature:-45℃~85℃
7).Work Humidity:5%~95%RH
8).Size:48.8*18.5*12mm
4.Ethernet Controller Features:
1).IEEE 802.3 compatible Ethernet controller.·
2).Integrated MAC and 10 BASE-T PHY.
3).Receiver and collision suppression circuit.
4).Support a 10BASE-T terminal with automatic polarity detection and correction.
5).Supports full-duplex and half-duplex modes.
6).Programmable to retransmit automatically when a conflict occurs.
7).Programmable padding and CRC generation.
8).Programmable automatic rejection of error packets.
9).SPI interface with a maximum speed of 10 Mb/s.
5.Buffer:
1).8KB send/receive data packet dual-port SRAM.
2).Configurable transmit/receive buffer size.
3).Hardware-managed cyclic receiving FIFO.
4).Random access and sequential access of byte width (address auto-increment).
5).Internal DMA for fast data transfer.
6).IP checksum calculation supported by hardware.
6.Media Access Controller (MAC) Features:
1).Support unicast,multicast and broadcast packets.
2).Programmable data packet filtering,and wake up the host when the logical AND and OR results of the following events are true.
3).Unicast destination address.
4).Multicast address
5).Broadcast address
6).Magic Packet
7).Group target address defined by a 64-bit hash table
8).Up to 64 bytes of programmable pattern matching (the offset can be defined by the user)
9).Loopback mode
7.Physical Layer (PHY) Characteristics:
1).Shaping output filter
2).Loopback mode
8.Package:
1pcs ENC28J60 Network Module