DIY Kit Five-Pointed Star Breathing Light Gradient Red LED Light for Christmas SMD 0805 LED Soldering Practice
$2.65$3.7930%
Quantity | 3+ | 5+ | 10+ |
Price | $2.50 | $2.35 | $2.10 |
00d : 00h : 00m : 00s
Item ID: GY18598-1
Product Details
1.Introduction:
PBL-20S is a Five-Pointed Star Breathing Light DIY Kit. It is a simple breathing light and Its brightness automatically fades.
2.Feature:
1>.20pcs highlight LED
2>.Simple circuit to learn
3>.Automatic flashing
3.Parameter:
1>.Product Name:PBL-20S Five-Pointed Star Breathing Light DIY Kit
2>.Product Number:PBL-20S
3>.Work Voltage:DC 4.0V~6.0V
4>.Work Current:40mA
5>.Power Type:Battery Box
6>.Work Module:Gradient
7>.Color:Red LED
8>.Work Temperature:-40℃~85℃
9>.Work Humidity:5%~85%RH
10>.Size(Installed):47*45*6mm
4.Application:
1>.Training soldering skills
2>.Student school
3>.DIY production
4>.Project Design
5>.Electronic competition
6>.Gift giving
7>.Crafts collection
8>.Home decoration
9>.Souvenir collection
10>.Graduation design
11>.Holiday gifts
5.Installation Tips:
1>.User needs to prepare the welding tool at first.
2>.Please be patient until the installation is complete.
3>.The package is DIY kit.It need finish install by user.
4>.The soldering iron can't touch the components for a long time(1.0 second), otherwise it will damage the components.
5>.Pay attention to the positive and negative of the components.
6>.Strictly prohibit short circuit.
7>.User must install the LED according to the specified rules.Otherwise some LED will not light.
8>.Install complex components preferentially.
9>.Make sure all components are in right direction and right place.
10>.Check that all of the LED can be illuminated.
11>.It is strongly recommended to read the installation manual before starting installation!!!
12>.Please wear anti-static gloves or anti-static wristbands when installing electronic components.
6.Installation Steps ( Please be patient ):
Step 1: Install 20pcs SMD 0805 Red LED at LED1-LED20. It is negative pole for LED where there are green mark on LED pin. The ellipse pad is negative pole on PCB that shall connect to negative pole for LED.
Step 2: Install 1pcs SOP-8 LM358 at U1.There is a smaller dot on one corner of the IC and there is a white dot on PCB where the IC can place on.These two marks are corresponding to each other and are used to specify the installation direction of the IC.
Step 3: Install 1pcs SOT-23 S8050 Transistor at Q1.
Step 4: Install 1pcs 22ohm SMD 0805 Resistor at R5.
Step 5: Install 1pcs 33Kohm SMD 0805 Resistor at R6.
Step 6: Install 3pcs 47Kohm SMD 0805 Resistor at R1,R2,R4.
Step 7: Install 1pcs 100Kohm SMD 0805 Resistor at R3.
Step 8: Install 1pcs 47uF SMD 0805 Capacitor at C1.
Step 9: Install 1pcs 9V Battery Box.
Step 10: Connect to power supply and enjoy the effect.
7. Diagram and Components List