- prev
- next
DC 3.6-5V LED Light Control Module Bluetooth-compatible RGB Light Lamp Control Board Module for iOS/Android 4.2 Smart Home
$8.39$11.9930%
00d : 00h : 00m : 00s
Item ID: 12050
Product Details
Product Introduction:
1>. Bluetooth Version: Bluetooth V4.0 BLE
2>. Power Supply Voltage: DC 3.6-5V
3>. Current Consumption: 15mA;sleep mode 2uA
4>. Operating Temperature: -30~80 celsius
5>. Radio Frequency: 2.4GHz
6>. Support 250kbps,500kbps,1Mbps data transmission rate
7>. Size: 50*50mm
8>. PWM Operating Frequency: 20KHz
9>. Applications: for driving PWM LED lamp
Pin Definition:
1>. VDD: Power Interface (3.6-5V)
2>. GND: Power Ground
3>. PWM1: PWM1 output port, correspond Red
4>. PWM0: PWM0 output port, correspond Green
5>. PWM3: PWM3 output port, correspond Blue
6>. PWM2: PWM2 output port, correspond White
7>. GP23: GPIO23, preserve IO port, has no function
8>. GP22: power on/off interface; long press the power on or power off; low level valid
9>. GND: power ground
10>. ANT: antenna interface
Module Size Picture:
Principle Picture:
Notice:
1>. Port level is TTL level,and output high level is VDD.
2>. Input voltage is 3.6-5V.
3>. Please add a pull-down resistor when PWM output drive triode.
Note: The updated vesion of this module doesn't have button keys, the place is the position pointed by the arrow from below picture.
Note: The updated vesion of this module doesn't have button keys, the place is the position pointed by the arrow from below picture.
Warning: Considering respect the copyright of the partners, it is not allowed to use our pictures or videos without approval.
We are not responsible for any complaints from our partners if you used the pictures/videos arbitrarily.
I. Tested by ICStation's Outstanding Partner Electronik Scream:
Learn More Details in the Video:
II. Tested by ICStation:
Learn More Details in the Video:
III. Reviewed by ICStation's Outstanding Partner Electorials:
https://www.electorials.com/review-017-led-light-control-bluetooth-module-for-iosandroid-review.html
