1.Description:
   This kit consists of a combination of 32 LEDs that emit multi state cyclic flashing light. Eight 10 pins are used to control the flashing of 32 LEDs according to the program settings. S1 is the start stop switch, and the circuit defaults to working state after power is turned on. When S1 is turned off, the "heart tip" LED is in breathing state standby mode. Press S1 at any time, and the circuit enters standby mode. At this time, the "heart tip" LED is in breathing state flashing, and then press S1 circuit to enter working state again.

2.Parameter:
  1>.Work Voltage: DC 5V
  2>.Work Temperature: -25℃~85℃
  3>.Work Humidity: 5%~95%RH
  4>.Size: 60*50*10mm