RFID Wireless Reader Module 13.56MHz 125KHz Dual Frequency WG26 WG34 ID IC Card Reader
$6.99$9.9930%
00d : 00h : 00m : 00s
Item ID: GY17857
Product Details
1.Description:
It is a IC+ID dual frequency card reader module. It integrates a high-performance card reader RF circuit and antenna,replacing the Wiegand data output protocol.
2.Feature:
Wigan dual format output
Support dual frequency RFID card
Support ID+IC card
3.Description:
1.Product Name:IC+ID Dual Frequency Card Reader Module
2.Working Voltage:DC 5V
3.Working Current:40mA
4.Support Reading:125kHZ and 13.56MHZ card reading
5.Interface:Wiegand
6.Work Temperature:-35℃~85℃
7.Work Humidity:5%~95%RH
8.Size:47*26*5mm
4.Wiegand Interface Output Introduction:
1.When a card is sensed,the serial number of the card will be output through the two data lines Data0 and Data1.
2.Data0 and Data1 are high replacements without data output.
3.Data bit 0 produces a 400us width concatenation on the Data0 line.
4.Data bit 1 produces a 400us width concatenation on the Data1 line.
5.The length of each bit of data is 2400us.
6.Each Mifare card has a serial number of 4 bytes,and we output the last three bytes.
7.The first 12 even parity digits are added to the front and the last 12 odd parity digits are added to the back,for a total of 26 bits of data.
8.For example:The card number is:6B 3D 12 D6
The output data is:3D 12 D6
5.Applicable:
Attendance fingerprint reader module
Access control intercom card reader module
6.Package:
1pcs IC+ID Dual Frequency Card Reader Module
1pcs Wire