Parameter:
Product Name: Spark Gap Tesla Coil DIY Kit
Work Voltage: DC 12V~36V
Work Power: 60W-80W
Arc length: about 10cm
Work Temperature: -40℃~85℃
Work Humidity: 5%~95%RH
Size (Installed): 150x150x410mm

About this DIY kit:

Funny Scientific Experiment Kit: Arc Plasma Wireless Transmission Experiment Model for magic science. Artificial simulated lightning can be used as a physical experiment to increase students' learning and exploration ability. Students can also make such a Tesla model by themselves as a technology competition entry, which will have a great chance of success.

DIY a Tesla Works of Your Own : The Electric Arc Generator is a DIY kit and needs to be soldered by yourself. It is very suitable for exercising your hands-on ability. The soldering method of this product is not complicated, but you must have the soldering foundation. You can read the user manual for the detailed soldering Instructions.

Cool Features: The Tesla coil can produce high temperature and high-pressure plasma which can wireless transmission and light fluorescent light, stroboscopic tube, neon bubble, glow tube, spectral tube, etc. It has a wonderful arc. Arc spraying reaches 10cm+ (can reach 15cm through tuning). You need to prepare the power supply yourself (DC 12V-36V 60-80W). The secondary coil must be connected to the ground before power ON.

Amazing Decorations On Your Desk: It's funny to see people's looks and reactions when they squeeze a little shot for this tesla coil model. Plug it and light the LED bulb up, and then it works like charm. It is very interesting to use it as an ornament.

Tesla Coil Plasma Ball DIY Kit, Spark Gap Tesla Arc Generator Touchable Artificial Lighting Science Experiment Project Magic Science Tesla Toy

It is a Spark Gap Tesla Coil DIY Kit. The Tesla coil can produce high temperature and high-pressure plasma which can wireless transmission and light fluorescent lamp. It has a wonderful arc. It is a very interesting small production of scientific experiments. These are DIY Tesla coil Kit parts that need to be soldered and assembled by yourself!

Feature:
1>.Brilliant arc
2>.Wireless transmission
3>.Lighting in the air
4>.10cm arc(Someone can tune to 15cm!)

High-quality TV ignition package   D1mm pure copper wire        pcb board                10 BM induction cooker capacitors

Know Before You Buy

1. Basic soldering skills are required. You need to solder the circuit board and connect the wires. You need to buy the soldering iron and the tin wire glue gun by yourself. It is recommended to buy a thicker tin wire (but not too thick, otherwise there are a few spots that are not easy to solder. board).

2. You need to prepare the source adapter yourself, and you will need it in the step of pulling the arc

3. If the soldering skill is not enough, you must pay more attention to the soldering tin of the circuit board and the soldering tin of the wire connected to the coil on the booster package. It’s easy to be unsuccessful in the welding, causing no arc to be drawn behind.

4. Safety protection must be paid attention to, especially after the final success and halfway through, we must be cautious. If you forget to turn off the power when halfway through, it is easy to be charged.

In general, as long as you follow the instructions carefully, and ask us where you won’t or make mistakes, you will be able to make very good results in the end!

Finally, remind everyone that things related to electricity must be safe!

Installation Manual: 

Installation Tips
1>.User needs to prepare the welding tool and hot melt adhesive at first.
2>.Please be patient until the installation is complete.
3>.The soldering iron can't touch the components for a long time(1.0 second), otherwise it will damage the components.
4>.Pay attention to the positive and negative of the components.
5>.Strictly prohibit short circuit.
6>.Install complex components preferentially.
7>.Make sure all components are in right direction and right place.
8>.It is strongly recommended to read the installation manual before starting installation!
9>.Please wear anti-static gloves or anti-static wristbands when installing electronic components.

You need to prepare the power supply yourself, the product does not contain hot melt glue.

Buyer show

Note: The shell is not included. You can design the shell yourself according to your needs, and the shell makes the product both beautiful and safe

Children cannot operate the product alone!!!

Widely Application:
1. Exercising soldering skills.
2. Teaching experiment.
3. holiday gift.
4.Project Design.
5.Electronic competition.
6. Graduation design
7. Halloween