- prev
- next
TDL-555 Touch Delay Switch LED Light DIY Kit Electronics Experimental DIY Electronic Soldering Practice
| Quantity | 10+ | 30+ | 50+ |
| Price | $2.20 | $1.95 | $1.70 |
Product Details
Description:
This is a DIY touch delay LED kit. You need to solder it by yourself.
Install tools you need:
1>. Soldering iron
2>. Multimeter
3>. Solder wire
4>. Iron stand
5>. Diagonal cutting pliers
6>. The screwdriver
7>. Tweezers
8>. Long nose pliers
9>. Suction tin
10>. Cleaning sponge
11>. Screwdriver set
Parameters:
| No. | Product name | Touch delay LED lights |
| 1 | Model | TDL - 555 |
| 2 | Standby current | Less than 1mA |
| 3 | Standby indicator light | With |
| 4 | Triggered | Touch |
| 5 | Soldering difficulty Level | Easy |
| 6 | Working voltage | DC 5V |
| 7 | Working current | Less than 90mA |
| 8 | Delay time | Adjustable 3 seconds ~ 130 seconds. |
| 9 | Assembly instructions | TOR format |
| 10 | Circuit board size | 38mm*28.5mm(L*W) |
Note: the power supply voltage is strictly forbidden. If you need to change the power supply voltage, please change R1.
The R1 resistance increases by 1 ohm each time the voltage is increased by 1 V.Maximum voltage 12V.
When wiring, the red line is the positive pole, black line is the negative pole.
Finished Product Picture:
I. Tested by ICStation's Outstanding Partner arduinoLab:
Learn More Details in the Video:
(The language in the video is Russian)
II. Tested by ICStation:
